Waircom X Series Product Code:X

send enquiry
Price: AED 0.00

Pneumatic cylinders series "X" comply with ISO 15552 standard, being in this way completely interchangeable with the well-known cylinders to ISO 6431 standard, defining the dimensions of both the nude cylinder than assembled with fixings. They’re available in the bores from Ø 32 to Ø 100 and the cylinder barrel, made in extruded aluminium alloy, has some pits (T-shaped slots) on three sides where it’s possible to mount directly the new magnetic sensors series FM100. This peculiarity allows to leave the dimensions of the cylinders unchanged, keeping the mentioned sensors, completely embedded and granting them a better protection. The dynamic seals are made in high performances polyurethane with standard working temperature between -35°C and +80°C. Among all the available versions, a special mention deserves the non-rotating piston rod one with a particular section, made of AISI 304 stainless steel supplied as standard. The compact and advanced design makes the series X a product aesthetically appealing yet useful. In fact, thanks to proper cover strips that give the cylinders a really clean profile, the cylinders are not subject to receive dirt and so they result suitable also for difficult environments like the food one. A further feature is the possibility to assemble some series of valves directly on the cylinder barrel thanks to the brackets type X/P/M


Operating pressure    1÷10 bar
Working temperature    
0 ÷ +80°C (with dry air —35°C)
0 ÷ +150 °C with seals for high temperature
(with dry air —10°C)
Fluid    Filtered, unlubricated or continuous lubricated compressed air
Versions    Double acting; Single acting front spring; Single acting rear spring;Through rod; Double push tandem; Double stroke tandem; Opposed tandem
Bore    Ø 32,40,50,63,80,100
Port size    
Ø 32 = G 1/8
Ø 40-50 = G 1/4
Ø 63-80 = G 3/8
Ø 100 = G 1/2
Standard strokes (mm)    25, 50, 75, 80, 100, 125, 150, 160, 200, 250, 300, 400 320, 350, 500, 550, 600, 650, 700, 800, 900, 1000
Decelerators lenght    
Ø    32 40 50 60 80 100
mm 24 29 29 35 35 40
Maximum stroke (mm)
Ø 32 ÷ 100 = 3000
Max. stroke single acting (mm)    Ø 32 ÷ 100 = 50
End caps    Painted die-cast aluminium alloy
Cylinder barrel    Extruded profile, 20 µm anodized aluminium alloy
Screws    Steel (self-forming)
Piston rod    
C45 chromium-plated steel
ISI 303 rolled stainless steel
Rod nut    
Stainless steel
Piston rod bearing    Bronze-iron 20%, sintered, self-lubricating
Techno-polymer (supplied with and without magnet)
Aluminium alloy for high temperatures
Seals    Polyurethane Viton®
Cover strips    Polyvinyl chloride